This package provides a practical three-phase entry point for small farms, orchards, greenhouses, livestock facilities and moderate borehole or surface-pump applications. Its 17-module array supplies 10.285 kWp of nominal front-side PV capacity to a 7.5 kW, 400 V class solar pump inverter.
The included ready irrigation box and ground-mount structure simplify the reference equipment scope, while MPPT operation supports pumping under changing solar conditions. Final water output and operating time depend on the hydraulic design and local irradiation; the package must be checked against the exact pump curve before sale.
Key Advantages
- Clear small-farm three-phase capacity level
- 10.285 kWp nominal PV array
- 7.5 kW inverter headroom for a 5.5 kW pump class
- 1000 V class inverter configuration in the 2026 catalogue
- MPPT, weak-light and water-level control capability on the SPI platform
- Ready irrigation box, ground structure and PV connection materials included
Recommended Applications
- Small farms and family agricultural businesses
- Greenhouses, nurseries and orchards
- Livestock water systems
- Moderate borehole and surface-pump applications
- Drip-irrigation and small sprinkler networks
- Reservoir or elevated-tank filling
Package Contents
- 17 x TT605-144TNB10 605 Wp bifacial TOPCon solar module
- 1 x INV-SLM-TF-V2-7.5KW solar pump inverter
- 1 x HSK-TT-5,5-11KW-TF galvanized DC/AC ready irrigation box
- 45 m black 6.0 mm² solar cable
- 45 m red 6.0 mm² solar cable
- 1 x AY-GA-DZ-18P-2X9 ground-mount structure
- 2 x KNN-SMC4-SET connector set
Important Selection, Installation and Quotation Notes
- The published 17 x 1 string is approximately 893.86 V Voc at STC. Complete a minimum-temperature Voc calculation against the exact 1000 V inverter revision before quotation and installation.
- Confirm the pump's rated current, flow, head, duty cycle and motor insulation suitability; matching the 5.5 kW nameplate alone is not sufficient.
- The current live product page still shows an older 550 Wp / 17-panel configuration. Confirm that the offered package uses the 2026 TT605-144TNB10 module and the stated inverter code.
- Confirm the ready box's final IP rating, ventilation, internal fuses, isolators, surge protection, AC protection, connector count and water-level sensor inputs.
- Pump, pump cable, pipes, valves, filters, sensors, hydraulic accessories, civil works, earthing and installation labour are not listed in the current package bill of materials.
- Confirm ground-mount foundations, tilt, row spacing, rear-side clearance and albedo conditions; the calculated 43.92 m² is module face area only.
- The system has no listed battery. Pump output will vary with solar irradiance unless an approved AC or generator-assisted mode is separately engineered.
- Installation and commissioning must be completed by competent personnel in accordance with current manuals and destination-country electrical requirements.
