This commercial-farm package is intended for larger boreholes, orchard and plantation irrigation, higher-flow sprinkler systems and agricultural water-transfer duties. Its 48-module array provides 29.04 kWp of nominal front-side PV capacity and is arranged as three strings of sixteen modules.
The package uses a 22 kW metal-enclosure solar pump inverter for the 18.5 kW pump class, supported by a dedicated galvanized ready irrigation box. Selection must be based on the pump curve and hydraulic design because high flow, high head and long pipe routes can materially change the required motor load and daily water output.
Key Advantages
- Commercial agricultural capacity level
- 29.04 kWp nominal PV array
- 22 kW inverter for an 18.5 kW pump class
- Three-string PV arrangement
- Metal-enclosure SPI inverter platform
- Suitable for larger wells, sprinklers and water-transfer systems
Recommended Applications
- Commercial farms and agricultural enterprises
- Deep-well and borehole pumping
- Larger orchard, vineyard and plantation irrigation
- High-flow drip and sprinkler systems
- Reservoir filling and field-to-field water transfer
- Livestock facilities with substantial daily water demand
Package Contents
- 48 x TT605-144TNB10 605 Wp bifacial TOPCon solar module
- 1 x SPI-TT-11-22.0-TF solar pump inverter
- 1 x HSK-TT-22KW-TF galvanized DC/AC ready irrigation box
- 140 m black 6.0 mm² solar cable
- 140 m red 6.0 mm² solar cable
- 1 x AY-GA-DZ-48P-2X24 ground-mount structure
- 6 x KNN-SMC4-SET connector set
Important Selection, Installation and Quotation Notes
- Each sixteen-module string is approximately 841.28 V Voc at STC. The general 22 kW metal inverter sheet publishes a 900 V maximum input; cold module temperatures can raise Voc, so a destination-specific calculation and written string approval are mandatory.
- Confirm that the exact 2026 inverter revision and ready box support the required number of strings, PV current, fusing and connector arrangement.
- The current live product page shows an older 550 Wp / 51-panel configuration and a different presentation of the inverter. Use the current 605 Wp / 48-panel catalogue only after written BOM confirmation.
- Confirm pump curve, motor current, total dynamic head, pipe losses, water-level variation and daily operating window before quotation.
- Pump, pump cable, pipes, valves, filters, sensors, hydraulic accessories, civil works, earthing and installation labour are not listed in the current package bill of materials.
- The stated 124.00 m² is module face area only; actual land requirement is higher after tilt, row spacing, access roads and foundations.
- The system has no listed battery. Water storage or a separately engineered AC/generator input may be required where continuous water availability is critical.
- Verify cooling, dust protection, humidity control, surge protection, earthing and lightning protection for the agricultural environment.
