This is the most balanced single-phase package in the range. Its 14 solar panels provide 6.02 kWp of installed solar capacity, closely matching the 6 kW inverter output without requiring an unnecessarily large roof area. It is a practical choice for houses, villas, summer homes and small professional premises with a single-phase electricity connection.
During the day, the system can supply the property's active loads and direct available surplus energy to the lithium battery. Stored energy can then support evening consumption or selected essential circuits during a grid failure. The package is especially suitable where the priority is sensible everyday self-consumption rather than operating every appliance from the battery.
The published battery set consists of one GeneralPack and one BoosterPack, providing approximately 11.5 kWh nominal and 10.4 kWh usable storage. Backup operation must still be designed around the actual loads. High-consumption appliances such as electric heating, large pumps, ovens and air-conditioning systems can shorten backup time considerably and should not automatically be included in the protected-load circuit.
Suitable Applications
- Houses and villas with a single-phase connection
- Summer homes and rural residences
- Home offices and small professional premises
- Properties seeking to use more solar energy during the evening
- Selected backup for lighting, refrigeration, internet, security and control systems
Why This Package Is Recommended
- The 6.02 kWp array is closely matched to the 6 kW inverter.
- It provides a useful balance between roof area, daytime production and battery charging.
- The official live package pairs the two-battery set with the Uno Hybrid-K 6.0 inverter, while the exact supplied revisions will still be confirmed before quotation.
- It avoids both the reduced solar capacity of the Small package and the additional roof requirement of the Large package.
Package Contents
- 14 x TommaTech 430 Wp 108TN10 16BB TOPCon solar panel
- 1 x TommaTech Uno Hybrid-K 6.0 kW single-phase hybrid inverter
- 1 x TommaTech Hightech Power GeneralPack 5.8 kWh lithium battery
- 1 x TommaTech Hightech Power BoosterPack 5.8 kWh lithium battery
- 1 x TommaTech Uno Smart Meter
- 1 x TommaTech Next Generation Wi-Fi dongle
- 22 m red + 22 m black 6.0 mm² solar cable
- Published A Series tile-roof mounting components for 14 panels
Important Technical and Installation Notes
- Backup power is supplied through a separately designed EPS circuit. The package should not be presented as unlimited whole-house backup.
- The essential-load board, transfer arrangement, protective devices, battery cables, AC cable and distribution-board modifications are not shown as a complete assembly in the published package list and must be confirmed in the quotation.
- Battery operating time depends on the selected loads, their starting current, battery reserve setting, temperature and conversion losses. A fixed backup duration should not be promised before a load study.
- The published mounting components are intended for a tile roof. Metal, membrane, flat-roof and ground installations require a different mounting design.
- Final panel-string voltage and current must be checked using the destination's minimum temperature and the inverter's MPPT limits.
- Grid connection, electricity export and zero-export operation are subject to the destination country's utility rules and approvals.
- Structural suitability, waterproofing, wind and snow loads, earthing, lightning protection and AC/DC surge protection must be verified by the project installer.
- The older standalone battery compatibility sheet does not specifically identify the current Uno Hybrid-K 6.0 model. Confirm the exact inverter, battery, BMS, smart-meter and communication-product revisions before the final offer.
Information Required Before Quotation
To prepare a technically correct quotation, please share:
- Destination country and project address or coordinates
- Recent electricity bills and interval load data, where available
- Confirmation that the property has a single-phase connection
- Grid voltage, frequency, contracted power and main-breaker rating
- List of appliances and equipment used during the day and at night
- Separate list of loads that must continue operating during a power cut, including starting power where applicable
- Required backup duration and minimum battery reserve
- Roof type, usable dimensions, orientation, inclination and structural condition
- Roof and surrounding-area photographs showing possible shading
- Cable route distances between panels, inverter, batteries, main board and backup-load board
- Whether grid export is permitted or zero-export operation is required
- Local grid-code, utility-approval and certification requirements
- Existing earthing, lightning and surge-protection arrangement
- Proposed inverter and battery installation location, ventilation and ambient-temperature conditions
