The 35 HP / 26 kW package is positioned for high-capacity agricultural wells, larger sprinkler networks, plantation irrigation and substantial water-transfer applications. Its 75-module solar array provides 45.375 kWp of nominal front-side PV capacity in five strings of fifteen modules.
The package includes a 37 kW solar pump inverter, dedicated ready irrigation box, two galvanized ground-mount structures and the principal PV cable and connector quantities identified in the current catalogue. Because this capacity involves significant hydraulic and electrical loads, it should be quoted only after full project data and pump documentation have been reviewed.
Key Advantages
- High-capacity agricultural pumping class
- 45.375 kWp nominal PV array
- 37 kW inverter for a 26 kW pump class
- Five-string solar configuration
- Two ground-mount structure sections
- Suitable for large wells and high-demand irrigation networks
Recommended Applications
- Large farms and agricultural enterprises
- High-flow borehole and deep-well pumping
- Plantation and large-orchard irrigation
- Commercial sprinkler and drip networks
- Reservoir filling and long-distance water transfer
- Agricultural facilities with high daily water demand
Package Contents
- 75 x TT605-144TNB10 605 Wp bifacial TOPCon solar module
- 1 x SPI-TT-13-37.0-TF solar pump inverter
- 1 x HSK-TT-37KW-TF galvanized DC/AC ready irrigation box
- 190 m black 6.0 mm² solar cable
- 190 m red 6.0 mm² solar cable
- 2 x AY-GA-DZ-42P-2X21 ground-mount structure
- 10 x KNN-SMC4-SET connector set
Important Selection, Installation and Quotation Notes
- Each fifteen-module string is approximately 788.70 V Voc at STC. Complete a cold-temperature Voc calculation and verify the five-string current against the exact inverter and cabinet revision.
- The array's calculated STC operating current is approximately 68.85 A before design factors. Confirm inverter DC input-current limits, string fuses, cable ampacity and combiner arrangement.
- The current live page shows an older 550 Wp / 76-panel package with a different inverter presentation. The 2026 catalogue uses 75 x 605 Wp modules and a 37 kW inverter; obtain written final-BOM confirmation.
- Full hydraulic engineering is mandatory: verify pump curve, flow, total dynamic head, well recovery, pipe losses, water-level variation and daily water volume.
- Pump, pump cable, pipes, valves, filters, sensors, hydraulic accessories, civil works, earthing and installation labour are not listed in the current package bill of materials.
- The 193.74 m² value is module face area only. Actual land and foundation requirements will be materially higher.
- The system has no listed battery. Where pumping continuity is critical, evaluate water storage and a separately engineered AC or generator input.
- Confirm site access, transport split, structure foundations, wind and snow loads, lightning protection, earthing and local electrical conformity before export quotation.
