Uno Hybrid N Series Single-Phase 6.0–16.0 kW Inverters

TommaTech Uno Hybrid N Series is designed for single-phase projects that use low-voltage battery architecture. Its 40–60 V battery range, high charge/discharge capability and multiple MPPT configurations support residential and small commercial systems with substantial storage and backup requirements.

The platform supports new installations and AC-coupled upgrades, as well as parallel operation in on-grid and off-grid scenarios. The selected portfolio keeps the four power points shown on the official CW Enerji category—6 kW, 8 kW, 12 kW and 16 kW—while preserving the separate 8 kW and 12 kW codes published in the current official technical sheets.

Key Features

• Selected 6 kW, 8 kW, 12 kW and 16 kW power points
• 40–60 V low-voltage battery architecture
• Lithium-ion and lead-acid battery support
• Up to three MPPTs, depending on model
• Up to 290 A charge/discharge current in the selected models
• AC coupling for storage retrofits
• Generator-supported energy storage
• Parallel operation up to 16 units stated for the series
• Off-grid peak output up to twice nominal power for 10 seconds
• IP65 enclosure and remote-monitoring options

Recommended Applications

• Homes with 48 V or 51.2 V-class storage systems
• Large single-phase villas and small businesses
• AC-coupled upgrades to existing PV installations
• Sites requiring high battery current and backup capability
• Generator-assisted or weak-grid systems

Model Selection Guidance

First select the required AC power, then match the exact suffix to the intended hardware configuration. Do not merge UNO-HYB-LV-N8K-5P with UNO-HYB-LV-N8K-2P, or UNO-HYB-LV-N12K-2P with UNO-HYB-LV-N12K-1P: the official sheets publish different PV-current, battery-input, current, enclosure and bypass specifications for these same-power variants.

Essential Shared Specifications

• Nominal single-phase connection: L+N+PE; nominal voltage: 220/230 V; frequency range: 50/45–55 Hz or 60/55–65 Hz.
• Maximum efficiency: 97.6%; European efficiency: 96.5%; MPPT efficiency: above 99%.
• Operating temperature: −40°C to +60°C with derating above 45°C; allowable humidity: 0–100%.
• Communication: RS485, RS232 and CAN; optional monitoring methods include GPRS, Wi-Fi, Bluetooth, 4G and LAN.
• Protection set includes DC reverse polarity, AC overcurrent/overvoltage/short circuit, thermal, DC-component, anti-islanding, insulation and residual-current functions; optional AFCI and Type II DC/AC surge protection are stated.
• Grid and safety references include IEC 61727, IEC 62116, EN 50549, IEC/EN 62109-1/-2 and IEC/EN 61000-6 series.

Editorial Source Notes

• The official category provides four power buttons, while current technical sheets publish two distinct 8 kW codes and two distinct 12 kW codes. All six relevant codes are therefore retained.
• The current official technical sheets for this family are published in Turkish. Numeric values and model codes above come directly from those official sheets; the marketing copy is written in English for the target CMS.
• In the official 12–18 kW sheet, several AC labels are vertically shifted. The 60/57.4 and 80/76.6 A figures are presented here as maximum AC input/output current, and 100 A and 200 A as maximum continuous AC bypass current, following the table sequence, units and the adjacent N-series sheets.

Available Models

UNO-HYB-LV-N6K-5P, UNO-HYB-LV-N8K-5P, UNO-HYB-LV-N8K-2P, UNO-HYB-LV-N12K-2P, UNO-HYB-LV-N12K-1P, UNO-HYB-LV-N16K-1P